200KN Microcomputer-Controlled Electronic Universal Testing Machine With 0.5 Precision Level

Introduction:

Microcomputer-controlled electronic universal testing machine can test and analyze mechanical properties of various metals, non-metals and composite materials. It is widely used in aerospace, petrochemical, machinery manufacturing, vehicle manufacturing, wire and cable, textile fiber, plastic rubber, ceramics. Building materials, food, pharmaceutical packaging, metal materials, construction engineering and other industries, as well as institutions of higher learning, research institutes, technical supervision, quality inspection stations, etc.; can be stretched according to GB, ISO, ASTM, JIS, DIN and other standards , compression, bending, peeling, shearing, tearing, puncture, bursting and various high and low temperature tests, can detect the yield strength, tensile (pressure, bending) strength, elongation, tensile strength, non-material Proportional strength, elastic modulus and other parameters.

Main Specifications:

• The load cell is a wheel-type tension and pressure sensor 200KN with an accuracy of 0.05% FS. The relative accuracy of the system's force measurement accuracy is up to ±1% in the range of 2% to 100% FS.

• electronic extensometer 50mm, accuracy C, measuring the maximum: 10mm in the range of 2% -100% FS system deformation deformation accuracy of up to ± 0.5%.

• The displacement sensor adopts 2000 channel/turn photoelectric encoder, and adopts 4 times technology to achieve resolution of 2400 channels/turn (resolution up to 0.001mm).

• The deformation measurement adopts the electronic extensometer produced by Beijing Steel Institute with a resolution of up to 0.01 mm.

• The measurement and control system adopts the AD800 testing machine measurement and control system. The main indicators are:

• Three analog input channels for force value and electronic extensometer measurement, the number of AD conversion codes is ±120,000 (the split-free measurement with high-resolution AD converter is better than the 4-speed amplification).
• A 1:100 speed ratio digital output channel, with stepless speed regulation within 2~200mm/min of the control servo system.
• Three photoelectric coded input channels are used to measure large deformation and displacement measurements, and 4 times the technique is used to improve the measurement resolution.
• A manual operation box, 8 buttons (fast up, fast down, slow up, slow down, jog up, jog down, stop, run).
• Displacement control rate range 0.01~300mm/min
• Displacement indication error within ±0.2% of the indicated value
• Displacement resolution 0.04um
• Stress control rate range 0.005~5%FS/s
• Stress control rate accuracy When the rate is <0.05% FS/s, it is within ±2% of the set value, and when the rate is ≥0.05%FS/s, it is within ±0.5% of the set value;
• Strain control rate range 0.005~5%FS/s
• Strain control rate accuracy When the rate is <0.05% FS/s, it is within ±2% of the set value, and when the rate is ≥0.05%FS/s, it is within ±0.5% of the set value;

Specifications:

Accessories:

Technical information:

• Instruction manual and maintenance manual (with control system principle and consumable parts map, etc.)
• Operating software manual
• Certificate of conformity,

Technical Performance:

• The whole system adopts digital design, which is safe, stable, reliable and high precision.
• No adjustable device in the whole system, digital zero calibration and automatic calibration of measurement and control parameters
• System integrated CPLD computing device with high-speed computing capability to process digital signals in real time
• This system adopts PCI2.1 bus standard, which is easy to expand, easy to upgrade and “plug and play”

Integrated precision instrumentation with programmable amplifier, automatic shifting

Photo Show:

Software introduction:

Main screen:(can be changed in English)

Data processing interface:

Description for software:

• Based on the WINDOWS operating platform, the software is simple to operate, powerful, and man-machine conversational structure. Easy to learn with standard Windows XP style
• The software adopts modular design, different test type creation, test control and data analysis have separate modules, which are separated from the main program. Can adapt to a variety of test types of test control and data processing
• The test data can be added by the user, the number of which is not limited, and the new test record is adopted by the template method, which is convenient and quick.
• Automatically complete the test process, judge the break type, and automatically record and save the test data. All test data is saved in an internationally accepted XML format
• Efficient test data management function, which can quickly query, load and delete test data in various ways.
• End of the test system automatically analyzes and statistically tests the results. The analysis method can be set by the user.
• Flexible report editing function, providing users with a special report editing tool for graphic layout, easy to learn, easy to print test curves and related pictures and texts
• Users can delete test data as needed
• Users can change the analysis method according to their needs. The data can be modified according to their own needs.
• Dedicated database management library module
• Simultaneous recording of force-time, deformation-time, displacement-time test curves, which can be switched at any time, zoomed in and out, horizontally or vertically, real-time high-speed sampling
• Provide a variety of report printing interfaces, users can edit reports in any format as needed
• Test data is automatically stored in all standard test data and curves.

The test curve is displayed in real time during the test. After the test is completed, the test data, curve and test piece information of the test piece will be displayed in this operation window.

Batch data processing and batch report printing window

A batch of similar test pieces can be aggregated and analyzed, the measurement and control data can be compared and the average value can be calculated, and the test pieces can be collectively printed in batches. We can customize special test reports for our customers. These are just a few representatives of many forms. The test report can also be edited and printed according to user requirements and has relevant processing software (batch processing, control programmer, MaxDoc report processor, MaxXls report processor, etc.)

Q&A:

1. Q: What is your warranty ?
- 12 months product warranty, but lifetime for services.Free Non-consumable components will be provided if any performance failure occurs within 12 months caused by non-human damage.

2. Q: How-to vedio provided ?
- Yes, if required, our engineers will record a specialize how-to video for you.

3. Q: 1.Are your company a trading one or a factory?
- Yes, we are a manufactured factory+ trade (integration),15 years focusing on test instruments field,9 years exporting experience.,warmly welcome to visit our plant(factory), we also support OEM and ODM.

4. Q: After an order is placed, when to deliver?
- Generally about 25 days, If we have inventory, we can arrange shipment within 3 days.

5. Q: What about the warranty with after - sales services?
- 12 months warranty. Besides,we can help you to repair your problem controller freely,even it's not from our factory.
What you need to do is to send us the controller. After the warranty, the professional after-sale service team will provide perfect technical support,and help customer solve problems encountered while using our product, handles guest problems and complaints in a professional and timely.

6. Q: What about the services and product' quality?
- Each instruments must be carried out 100% quality examination and test when shipping and delivery goods.
Product use training, each of our product provide video training to show you how to install & operate.
Engineers would be go abroad to training, repair and others help you need.

7. Q:what about the packing of equipment?
- Covered with air bubble film before put the machine into the stanard exporting wooden case,
which not only has good shock absorption, impact resistance, heat sso has the advantages of nontoxic,
odorless, moisture corrosion, good transparency etc.

          Dongguan Liyi Environmental Technology Co., Ltd. is a high technology supported production-oriented enterprise who specializes in developing, manufacturing,marketing all kinds of environmental equipment. Our company has advanced technology, experienced technical management personnel and efficient professional service staffs, fine quality management and perfect after-sales service system. 

         To strengthen the quality awareness,perfect management system,improve product credit,meet customers increasing requirements, our company brought into ISO9001:2015 international quality management system and obtained the certificate: N0006997-1. 

         Our company will continue to develop, innovate and keep faith. We combine with the international testing standards and the specific demands of customers that may establish a new banner in Chinese testing industry.