Digital Gold Purity Test Meter And Metal Density Meter Precision
0.005 CE Certificate
Suitable for : Jewelry industry , bank , Pawn industry , Gold and Precious
Metal research lab .
Principle: According to the buoyancy method of Archimedean principle , can
show gold karat density and purity% rapidly and accurately .
Functions :
1. Density Tester for Precious metal need Only two weighing steps ,
the purity% of precious metals and gold karat can be shows rapidly
and accurately .
2. No stains and scratches left on gold after testing , it doesn't
need to use the sulfuric acid solution to test the standard samples
.
3. Density Tester for Precious metal With the special software
design , it can directly and circularly show the gold karat
(including gold-copper-silver , gold-copper , gold -silver), gold
purity% (including including gold-copper-silver , gold-copper ,
gold -silver )
4. Density Tester for Precious metal With the function of HI and LO
limit , the wide karat range from 9K to 24K and the data of HI and
LO can be set freely .
5. With the mixture proportion function , it can test other
precious metals , such as : platinum , silver , palladium , copper
, rhodium.....and so on .
6. By adopting the design of big tank , it can decrease the
inaccuracy caused by supporting wire's buoyancy
7. Density Tester for Precious metal Can't test the samples inlaid
precious stones and hollow samples . It can be used as general
balance .
Parameter:
Model | AR-300 | AR-600 | AR-900 | AR-1200 | AR-2000 |
Maximum weight | 300g | 600g | 900g | 1200g | 2000g |
precision | 0.005g | 0.01g |
density | readability | 0.001g/m³ |
scope | 0.001 - 99.999g/m³ |
Measuring table | ABS injection moulding |
Result display | Density, volume |
tank | injection moulding, transparent tank(dimension:L:16.9 cm×W9.8
cm×H8.3cm)
Can be customized accordance of size of sample |
Measuring steps | ①put the sample to the table,weight display,press “ENTER” to
record. ②put the sample in the water,weight in the water display,press
“ENTER”to get the density value. |
parameter | Temperature setting,medium measuring density setting,primary and
secondary material density setting |
Correction way | ①main engine,②tank,③measuring
table,④tweezers,⑤thermometer,⑥weight,⑦cover dust-proof,
wind-proof,⑧power transformer |
Standard accessories | ①main engine,②tank,③measuring
table,④tweezers,⑤thermometer,⑥weight,⑦cover dust-proof,
wind-proof,⑧power transformer |
power | AC100V~240V 50HZ/60HZ (European standard plug) |
Weight and dimension | 4.5kg/42.5 cm*17.5*32.5cm |
Photo Show:
How about after-sales Service
(1)If errors occur, please refer to the troubleshooting tips of the
instruction manual
(2)Please contact with our after-sales service department or
distribution in time if can’t clear fault
(3)When you contact us with a service problem, we will act within
12 hours and provide solution within 24 hours.
(4) technical support, and 24 hours online service
(5)If the product have some big troubles and it must be sent back
to our factory to repair during its warranty period, you just need
to shipping the product to us and we will sent you a new one.The
service is excluding if the machine is breakdown caused by
following reasons:
a:Wrong operation
b:Fixed or refitted personally
c:The machine itself is not the reason caused breakdown
d:Applying the machine under the serious condition. Such as high
temperature, moist, corrosive gas, or vibration.
e:Move or transportation as soon as installed
f:Consumables and easy-loss components
g:Natural disaster
