Cusomized Full - Automatic Climate Chamber Temperature And Humidity
For 80L - 1000L
Design Standard:
GB/T2423/5170/10586, JIS C60068, ASTM D4714, CNS3625/12565/12566
Characteristics:
1. The machine is manufacturing with 304 stainless steel material,
it is a durable materials, and keeping perfect performance for uses
of long time
2. it is hot sale model machine in our company with superior
performance and competitive prices,
3. we can producing the capacities from 80L to 800L, the scope of
temperature is from - 70℃ to 150℃, and the humidity scope is about
20 - 98%.
Feature:
1. Double-layer glass window in rectangle shape, which can be
visible for the experimental article when the test is going on.
2. The window was designed the technical device, it can prevent the
water vapour congealed to water drop. And the fluorescent lamp keep
the inside shine,
3. the machine support the function that external test power supply
and you can adjust the location of the platform that place the
experimental articles.
4. The machine 100% are airtight , because the double-layer door
keep the air out. It can keep the temperature and humidity inside
the machine
5. it also support the functions external water supply system so as
to add the water to barrel. In addition, it is environmental friendly and it can recycling use.
parameters for your reference:
| Mode | LY-280 | LY-2150 | LY-2225 | LY-2408 | LY-2800 |
Inner Size W×H×D(cm) | 40×50×40 | 50×60×50 | 60×85×80 | 60×85×80 | 100×100×80 |
Outside Size W×H×D(cm) | 93×155×95 | 100×148×106 | 117×166×91 | 140×176×101 | 170×186×111 |
| Volume (V) | 80 L | 150L | 225L | 408L | 800L |
| Temp and Hum Range | A:-20°C~150°C B: -40°C~150°C C: -60°C~150°C D: -70°C~150°C RH20%-98% |
| Function | Fluctuation | ±0.5°C ±2.5%RH |
| Deviation | ±0.5°C-±2°C ±3%RH(>75%RH); ±5%RH(≤75%RH) |
Controller Analytical Accuracy | ±0.3°C ±2.5%RH |
| Material | Inner Wall | #SUS 304 Stainless steel material |
| Outer Skin | #SUS 304 Stainless steel materiasls |
| Heat Preservation | High temperature resistant, high chlorine acid b vinegar foam insulation materials |
| Wind Cycling Way | Centrifugal fan-broadband type forced air circulation |
| Refrigeration Way | Single stage compression refrigeration |
| Refrigerater | French Tecumseh |
| Refrigerants | R4O4A USA Dupont environmental protection refrigerant(R23+R404) |
| Condensing Way | Air-cooled or water-cooled |
| Heater | Nickel chrome heating wire heater |
| Humidifier | Semi-closed steam and wet |
| Water Suplying Way | Automatic cycling water supply |
| Standard Accessories | 1 Observe window(double-deck cavity toughened glass), 1 50mm test hole in the left, 1 PL inner chamber lamp, 2 clapboards, 1 bag of wet and dry bulb, 3 fuses, 1 power line. |
| Safety device | Non-fuse-switch(compressor overload, refrigerant high low voltage, over-humidity and temperature protection, Protection switch,fuse stoppage warning system |
Products showcase:
Accessories:
| Motor | Conveying the wind motor with high speed and docking several wing
air fan. It can make the environment inside machine clean and help
the machine get perfect performance |
| Tempered glass | The glass window is visible. Which can be visible for the
experimental article when the test is going on. The window was
designed the technical device, it can prevent the water vapour
congealed to water drop. And the fluorescent lamp keep the inside
shine |
| Many wing fan | High efficiency, making the condition inside the machine keep
accuracy. |
| Touch screen control | Full color touch screen control(imported computer LCD screen
intelligent operation, easy to operate and convenient to use ) |
| Instrument connection | External power lines or signal lines, realizing diverse test |
| The machine switches | 2 keys, USB in the middle of machine, it is easy to convey the data |
| The cooling panel | A good ability that cooling the panel, easy to disassemble and
maintain the machine for protecting the machine. |
| Water level gauge | Hoe much water inside the machine? The gauge can help you know
that. |
| Direction wheel | There’s four wheels on the bottom of machine, moving freely
|
Company Profile:
Questions and answers.
Why do you think your products are of good quality?
A: we have regular customers in domestic and overseas, we will keep
in touch with our customers, and got the information of our
products from customers, and we obtained possitive feedback from
customers about the quality and the superior services .
why should I choose your machines?
A: Maybe our test machine are not cheapest in china, maybe our test
machine are not the best quality in china, but according to our
excellent feedback of our regular customer, Believing us that we
not only sell our products, but also our excellent
services(after-sell services).
If you have any other questions, just feel free to let us know.
