CD MFI Rapid Heating Plastic Melt Flow Rate Meter Instrument
Equipment
Description:
This Instrument can be used for ABS, polystyrene, polyethylene, polypropylene,
polyamide, fiber resin, acrylate, POM, fluorine plastic,
polycarbonate and other plastic materials, the melt flow rate (MFR)
or the melt volume flow rate (MVR) to be determined.
It's is a high precise melt testing instruments for the measurement of
melt flow rate (MFR)/(MI) and melt volume rate (MVR) in quality
control and research applications.
It's suitable to measure melt flow character of PP, PE, POM, ABS
plastics and plastic productions, widely used in factories,
products quality testing station, scientific and research
institutes, and concerned industries.
Standards:
GB/T3682-2000,ISO1133-97, ASTM1238
Specification:
| Machine size(W*H*D) | 250*510*350mm |
| Power | AC220V±10% 50Hz |
| Barrel parameters | Inner hole 9.55±0.025mm |
| Pistons parameters | Piston head: 9.475±0.015mm |
| Piston length | H=6.35±0.1mm |
| Paramters | Extrusion hole 1=2.095±0.005mm |
| Temperature parameter | With intelligent temperature control instrument, with four pairs of significant temperature setting control, PID parameters can be automatically set, precision up to ± 0.1 degree centigrade |
| Temperature rangeradius | 400℃ |
| Temperature accuracyblade to jawand dust collector | ±0.2 ℃ |
| Display resolution | 0.1℃ |
| Maximum comsuption | < 600W |
| Temperature recovery time | less than 4 min. |
| Weight parameters |
| Weight accuracy | ±0.5% |
| Basic configuration | 0.325kg, 1.2kg, 2.16kg, 3.8kg, 5.kg, 10.0kg, 12.kg, 21.6kg |
| Position detection |
| Loop distance from up and down | 30mm |
| Control precision | ± 0.1mm |
| Test flow control |
| Times of cutting the material | 0~10 times |
| Material cutting interval | 0~999s(set reference Table 2) |
| Control flow reaches the set temperature without volatility |
| Barrel temperature time | 15 min. |
| Material be installed | 1 min |
| Material sample temperature recovery time | 4 min. |
| When binder set | 1min |
Our Service:
If you face any problems in future during testing process we
promise we will give you a reply within 48 hours and solution
provide within 3 working days. We can offer operation video and
English operation manual. We can provide video-con.
1. Considerate Service Different countries plugs, manually change
the-voltage from 110V to 380V, insurance indicator.
2.Excellent After sale Service:
12 months warranty. Besides, we can help you to repair your problem
controller freely, even it's not from our factory. What you need to
do is to send us the controller.
3.Commitment:
We will sign a letter of commitment while we sign the contract,
which will improve your confidence to us.
4.Good Packaging:
Simulation Animatronic Customer Triceratops are covered with air
bubble film before put them into the wooden case, which not only
has good shock absorption, impact resistance, heat sealing and also
has the advantages of nontoxic, odorless, moisture corrosion, good
transparency etc.
Characteristics:
1. Multi-segment (five-stage) temperature control mode, five sets of
platinum resistance sensors, five heating sets separately
controlled temperature, high-precision intelligent PID control, the
heating slope is adjustable.
2.Temperature resolution of 0.1 ℃, the temperature uniformity of 0.2
℃, the temperature fluctuation of not more than 0.5 ℃ within 24
hours, the displacement sensor resolution is 0.001 mm
3.Over-temperature protection device.
4. High precision of constant temperature.
5. Can fastly recover to constant temperature condition after padding.
6. Can use manual and automatical material trimming test method.
7.Touch screen controller has high precision, 7 inch touch screen,
can be stored and print out the last 50 (or group) 20 test
conditions and data, .Reserved RS232 interface or USB interface to connect computers, can
will instrument operation and test data transmission through
computer control to save on the computer
Product Picture:
How to Contact Us?
Please Send your inquiry Details in the below for our
quotation,Click "Contact Now" !
